A Chainsaw Sharpener is a method for re-sharpening a chainsaw chain’s cutting point. It can be manual or electric-powered. Nothing can be cut with a blunt chainsaw. When you try to use a dull saw, the job becomes more difficult and dangerous.
Why is it necessary to sharpen a chainsaw? Sharpening Chainsaws Is Critical:
Chainsaw chains, like any other cutting board, become dull after prolonged use. Sharpening the chain on your chainsaw would be required at some point in order to keep it running smoothly. Cutting with a sharp chainsaw is smoother, puts less pressure on the chainsaw motor, and extends the life of the chainsaw.
Cutting with a dull chain stresses the powerhead, sprocket, guide bar, and of course the chain itself with an increased amount of wear and tear. It also takes a tole on the chainsaw operator, since dull chains are harder to cut with, and can make the saw more difficult to use with safely.
When Is It Time to Sharpen My Chainsaw?
Industrial chrome is applied to the chains, which wears off when the chains come into contact with dirt, grit, and other debris found on and around wood. The cutting edge will become rusty as the chrome wears off, and the chain will need to be sharpened.
The following are some of the obvious signs that your chain needs to be sharpened:
- When the chain stops self-feeding, you’ll have to force the saw to get it to cut.
- Instead of wood chips, the chainsaw produces wood dust.
- The saw does not cut in a straight line.
Chainsaws may be sharpened using a round file or a chainsaw sharpening jig. The article How to Sharpen a Chainsaw Chain: 3 Methods delves into three different sharpening techniques for these items. The article includes pictures to accompany how-to instructions as well as a short overview of chainsaw sharpening basics.
There are two angles on the chainsaw teeth that are critical when sharpening it. The tilt angle is normally 0o, but it can be up to around 10o. The top plate angle is usually between 15o and 35o. The manufacturer’s details will tell you about the top plate angle and tilt angle that your chainsaw needs.
If you’re sharpening with a round disc, a filing guide might be useful. This will improve the accuracy of your filing and save you time. A guide will help ensure that filing strokes are consistent, which will result in a pleasant sharp chain.
Though you can sharpen your chain at home, Stihl’s chainsaw guide recommends only sharpening your chain about five times before taking it to a professional. Sharpening by a trained service provider ensures that the cutting angles are filed correctly, resulting in a longer-lasting chain.
Daily chainsaw maintenance should include sharpening the chain. Keeping the chain sharp would make cutting with the chainsaw faster and smoother. Sharpening the chain will reduce wear and tear on other components of the chainsaw, reducing the need for maintenance and extending the life of the chainsaw.
The Dos and Don’ts of Sharpening a Chainsaw
When a woodcutter’s most important tool becomes dull, it just won’t cut it.
It’s important to maintain a professional attitude about the use and maintenance of your chainsaw, whether you’re a timber worker or just want to cut your own firewood. When you chew through thick wood, thousands of cutter teeth can become rusty, decreasing the tool’s effectiveness and making it more physically demanding to control. Sharpening the chainsaw with filing on a regular basis will hold it purring like a tough kitten. Read on to learn how to sharpen a chainsaw properly before attempting the operation.
DO Examine the chainsaw
Familiarize yourself with the sections of the sawchain by reviewing the detailed diagrams in your owner’s manual. Aside from ties and straps, there are various cutters, which are the subject of the sharpening operation. Each cutter has two sharp areas, one on the top plate’s edge and the other where it intersects the top plate on an outside plate. The cutter has a notch in the centre, known as a “gullet,” and a hook-like protrusion on the other end. The hook, also known as a “raker,” is a depth gauge that indicates how much of a bite the cutters take out of the wood while the saw is running.
The cutters of a chainsaw may be sharpened and the depth gauges filed for optimum cutting. Keep in mind that chainsaw cutters differ slightly in shape and size from model to model, but they are all sharpened in the same way.
Don’t wait for the dust to fall.
When a chainsaw created more wood dust than wood chips while in use, the old rule was to sharpen it. Sharpening the cutters before that point is a better step. The sharpening process would be minimal if you follow a routine of sharpening every second or third time you fill the chainsaw with petrol, and you will never have a dull sawchain.
DO Ensure that your chainsaw is well-balanced.
When honing the cutters, keep the chainsaw steady on a mounted vice. If you plan on spending the day in the woods, a tailgate-mounted vice will allow you to easily stabilise the saw and sharpen it on-site.
Remember to wear protective equipment
Put on heavy-duty work gloves, preferably leather, before you start because the sawchain’s hundreds of sharp cutters will scrape or cut bare skin. To shield your eyes from shavings, you’ll also need a decent pair of protective goggles.
Use the appropriate file diameter
Sharpening sawchain cutters is most commonly done with a round disc, and most files used for this purpose have a diameter of 4mm to 6mm. Sawchains, however, are not all the same size. To sharpen your sawchain, consult your owner’s manual for the best file diameter.
Don’t ever your file behind
Remember to bring your sharpening equipment with you because a lot of timber cutting is done away from home. You’ll have to return until you’ve loaded your pickup bed with firewood if you don’t.
Do file in one direction
File from the inside edge of the cutter to the outside edge to get the sharpest cutting edge. Right and left cutters alternate from one side of the sawchain to the other on sawchains. Place yourself on one side of the saw bar and file the cutters on the other side of the sawchain to file the individual cutters. You’ll file the cutters on the right side of the sawchain if you’re standing on the left side of the saw bar. When you’ve finished with one side of the saw bar, move to the other side and file the remaining cutters.
Don’t pull the file–push it
A round file can only sharpen in one direction: away from you. Keep the file horizontally and follow the factory angle of the cutting corner as you gently but firmly force the file to sharpen the cutting corner (the spot on a cutter where the sharp top and side plates intersect). Then, to return to the starting spot, raise the file and push it once more. To file each cutter, use the same number of filing strokes and the same amount of pressure. It may only take two strokes per cutter to hone the cutting corner, but if the cutters are very dull, it may take more.
Do use a chainsaw sharpening guide
Using a sharpening guide if you’re not sure about filing the factory cutter angles. These inexpensive tools have a bracket on the bottom that holds a round file and look like rulers. Handheld versions are available for under $10, but if you need further assistance, go with a guide that clamps tightly on the chain bar. The guides have pre-marked lines to help you align the file at the proper sharpening angle, which is normally about 30- or 35 degrees. For the proper filing angle for your sawchain, consult your owner’s manual.
Don’t forget the depth gauges
Depth gauges, like cutters, need to be filed on a regular basis. Both sawing and filing wear down the cutters over time, causing the depth gauges (which stick out in front of each cutter) to become too high. Since the depth guides block the cutters, this can make sawing ineffective. You can either file the tops of the depth gauges freehand with a flat file or buy a depth gauge guide that fits between the cutters and has an opening that allows you to do so. The tops of the depth gauges should be a fraction of an inch—0.025 inches—below the cutting corner of the cutter.
If you follow those suggestions, you’ll have a better idea of the chainsaw sharpener is right for you and how to find it.
1. OREGON 520-120 BENCH SAW CHAIN GRINDER
This is the perfect chainsaw sharpener for professionals. It’s best for heavy-duty jobs and needs regular maintenance. There are three grinding wheels on it, as well as a dressing break. It has a self-centered Chain vice as well as vice hand positioning. It will set you back around $516. It includes a grinding template as well as down angle adjustments. For ease of use, the computer has a built-in lamp.
With a sharp design and a newly designed vise for better performance, the 520-series saw chain grinder blends premium quality and ease of use for high volume sharpening.
- It is easy to use
- Very powerful and good quality
- It has superior quality wheels
- It is very expensive
This is a computer with a 3000 rpm that can be placed on a table. It’s a professional machine with a 5.5-inch grinding wheel that can sharpen. It’ll deal with the four most popular change sizes with ease. This machine runs on 110 volts. It’s lightweight and has built-in lighting. It is flexible and offers a very safe experience.
Buffalo Corp is a leading wholesale importer of high-quality home and industrial goods at competitive prices.
- It has a depth stop for grinding.
- Simple to use and safe
- The instruction manual is difficult to understand.
Why do you use Oregon Bench Grinders? We know you take pride in your job and that you put in long hours every day. Your job or project’s craftsmanship necessitates solutions that are planned and constructed to exacting standards. Oregon is on your side. Providing you with the ease and consistency that you need.
This Oregon Bench or Wall Mounted Chain Grinder Sharpener is ideal for semi-professional and home users who regularly saw wood. This dependable bench grinder blends precision results with Oregon’s unsurpassed accuracy. A manual chain clamping vice is included, as well as one-way motor rotation for increased operator safety. It is suitable for all kinds of chains.
Sharpens 1/4″, 3/8″ low profile, 0.325″, full profile 3/8″, and .404″ pitch chain
Top plate and down angle settings. Wheel wear indicator available.
Includes a dressing Brick, a quick check grinding template, and three grinding wheels for sharpening of 1/4″, 3/8″ Low profile, .325″, 3/8″ and .404″ pitch chain(Oregon part numbers OR534-18, OR534-316, and OR534-14). Built-in light.
- It is easy to use.
- Quite strong and high-quality
- It comes with high-quality wheels.
- It is very costly.
Trimming your overgrown trees is simple and fast with the Sun Joe 20ViONLTE-PS8 cordless pole chain saw. The 20ViONLTE-PS8 combines the cutting efficiency of a comparable electric-powered machine with the convenience and independence of a lightweight (only 9.25 lbs.) cordless system, thanks to the same interchangeable 20 V 2.0 Ah EcoSharp battery used by the other tools in the 20ViON series.
The procedure is straightforward: PUSH the power on button after sliding the telescoping pole to the desired length. WATCH as the Oregon cutting bar and chain, which is 8 inches long and self-lubricating, makes easy work of overhanging tree limbs up to 7.5 inches thick, all while standing comfortably on solid ground.
Unlike gas-powered tools, the 20ViONLTE-PS8 uses the most advanced EcoSharp lithium-ion battery technology to provide whisper-quiet runtime while emitting zero carbon for cleaner air. Accidental starting is prevented by a built-in safety switch, and the 20ViONLTE-PS8 comes with a protective sheath for protected blade storage when the day is over.
The Sun Joe cordless and best chainsaw sharpener is an export product with a powerful 24 V motor. It is powered by a 2 amp battery. It’s possible to install it on a table or a bench. It is made of aluminium and is very durable. It is not quickly refreshed. It has a 40-minute run time on a single charge.
- It has a lot of influence.
- Stuff that is both durable and of high quality.
- It is equipped with chain guide locks.
- It is costly.
The “Extreme Fix” hook and loop fastening on the cordless multiple sander TE-OS 18/1 Li allows the abrasive paper to be adjusted in seconds and then produce a high rate of material removal due to low slippage. A dust collection box with active dust extraction is provided for safe, virtually dust-free working.
The box can be replaced by a vacuum cleaner for drawing off the grinding/sanding dust directly using the dust extractor adapter, keeping the air clean and the abrasive paper sharp. The sander’s tough aluminium fan impeller ensures that it works smoothly and produces excellent performance. Six sheets of wood abrasive paper are included so you can get started right away.
The 18-Volt battery system provides the unique capability of powering all Einhell Power X-Change tools and garden equipment with a single battery type. THERE IS ONLY ONE BATTERY. THOUSANDS OF POSSIBILITIES
With 18V Li-Ion fuel, you’ll have cordless freedom and flexibility. SoftGrip and a palm-shaped grip provide precise guidance. Extreme-Fix for improved sand paper adhesion and a faster rate of material removal. Active dust extraction and a filter box ensure a dust-free process.
With a 3 amp battery, a cordless chainsaw sharpener is available. It gives you a razor-sharp edge and is reasonably priced. It has the ability to form any kind of China. It has a depth stop that prevents the chain from losing too much material. It’s the best chainsaw sharpener on the market, with plenty of battery life.
- It works very quickly.
- There are LED lights.
- It comes with a clamping kit.
- Stuff that is both durable and of high quality.
- There are a number of more efficient devices available.
- It’s not cheap.
This bench-mounted chain grinder has a powerful 85WATT motor and provides a stable work surface. With a pivoting head and vice angles that can be adjusted by 35 degrees to the left and right, as well as a brake to keep the chain in place when grinding or sharpening.
Designed for the skilled consumer who needs to keep several chains from different saws in top condition on a daily basis when using the chainsaws – but still affordable enough for the home user who wants to ensure their chain is still in good cutting condition.
Mini electric chainsaw sharpener that operates on electricity, as the name implies. It weights around 5 pounds and spins at 4200 rpm. It’s fast and efficient. This is made specifically for benches. This is a flexible machine that can work with any chain. It will provide you with exact, long-lasting, and accurate results.
- Adaptable to a wide range of chains.
- A powerful motor.
- Computer that is inexpensive.
- Placed on a bench.
- Chain clamping mechanism is unreliable.
The 12-Volt Electric Sure Sharp is a long-lasting, low-cost method that allows hand-sharpening a breeze. It is operated by a conventional 12-Volt auto-type battery and has durable, dependable features that withstand extended use.
Sharpening wheels for 1/4-inch,.325-inch, and mini 3/8-inch pitch chains are needed.
Sharpening comes with one 3/16-inch thick grinding wheel.
Chains with a 325-inch pitch and chains with a regular 3/8-inch pitch (72/73/75 series). A wheel-dressing brick is included, as well as a design for depth-gauge setting and wheel contour.
This is a chain sharpener that runs on batteries. It includes two different sizes of sharpening stones. It comes with quick-adjust sharpening guides to help you get a better understanding of how it works. It has a depth gauge built in. The computer is extremely long-lasting and has a powerful engine.
- It’s easy to use and take with you.
- It comes with a sharpening guide that you can customize quickly.
- It is long-lasting.
- Two different sharpening stones are included with the unit.
- The instruction manual is lacking in substance.
With the 12volt Chainsaw Chain Sharpener, you can sharpen your chain whenever you need it. Constructed with Anti-Aging and Anti-Impact cover that stays cool when the sharpener is in operation. It just weighs 2.2 pounds.
The Timber Tuff CS-12 portable electric chainsaw sharpener is a 12 V battery-powered unit. It has a maximum speed of 20,000 rpm, which is very high. The sharpener comes in three different grinding sizes, which adds to its value. It’s long-lasting and doesn’t get hot while you’re using it.
- It comes in three different grinding sizes.
- It’s transportable.
- The unit is long-lasting.
- It does not become hot.
- It has a small cord.
This Oregon Hydraulic Assist Bench Mount Chain Grinder is a tough grinder with all the features you’ll need for high-volume chain sharpening.
It’s incredible and highly successful. It is well worth purchasing. The computer is powered by electricity and draws 3.0 amps. It has a 3,400 RPM speed and weighs 18 pounds. This is the best choice for a beginner. There are three different grinding wheel thicknesses available: 1/4-inch, 1 inch, and 3/16 inch. Now, if you’re looking for a change sharpener with a powerful motor, this is the one to use.
- The motor is extremely strong.
- Beginners can appreciate how easy it is to use.
- It comes with a built-in lamp.
- Three different grinding wheel thicknesses are included with the device.
- It is very costly.
The file-n-joint, invented by Elof Granberg over 35 years ago, is the industry standard for accuracy and durability. This guide file helps your professional chain to fit perfectly in your bar. Both file sizes for normal chain pitches and lowering depth gauges are accommodated.
Cast aluminium and zinc-plated steel chain saw sharpener/file holder balanced on a bar. To set and maintain the proper sharpening angle, use calibrated swivel guide markings. Users can adjust the file height and tooth length using integrated features.
Chain sharpener with two functions, small in size and weighing about 12 ounces. It can be used as a shopping tool as well as a tooth and depth scale. At the same moment. There is no need for electricity since this works manually as well. It is solid, long-lasting, and of high quality. Since the mechanism has broken, it can no longer sharpen any chain. Cleaning is also a simple procedure.
- Suitable for all kinds of chains.
- It’s really easy to use.
- It has a very solid construction.
- Manually operated.
- Files can be easily removed for washing.
- Manual that is difficult to understand.
This is our fast, safe, and powerful electric chain saw sharpener. It has a 4800 RPM grinding speed, a large side safety guard, and chain rotation rollers that can keep your chain saw in perfect condition. It can be mounted to a bench, wall, or vise for convenient sharpening of your chain saw.
Another long-lasting and high-quality product is the Yaetek Electric Chain Sharpener, which uses an 80 5W motor and 110V power. It has a 4800 RPM speed and is ideal for use on a wall, bench, vice, or table. With a very special and traditional style, this could cost you about $53. It is capable of shopping in a variety of chains. If you need something to shop in all of your chains, this might be the best option for you.
- Suitable for all chain forms.
- It’s quick and effective.
- Long lasting and high-quality.
- It is expensive
Don’t go to the hardware store every time you need your chain saw’s chain sharpened. A dull chainsaw wastes time and money, not to mention the risk of injury that dull blades pose. With the Pro-Series Electric Chain Saw Sharpener, you can save time and money by sharpening your chain yourself. It adjusts most common chain designs and is simple to use when installed to a bench, wall, or vise. To get the teeth nice and clean, the 4-1/4-inch x 1/8-inch grinding wheel spins at 4200 RPM. Simply plug it into a 120-volt wall socket.
This falls first on the list with a very amazing design; it works on electricity and uses 85 W of power. It can run at a speed of 4200 rpm. If you are finding a device that can speed up chain sharpening then this is the best. It is versatile and can shop in different types of chains.
- It can be used in a variety of chains.
- It can be easily placed on wall, bench
- The grinder runs at a high pace.
- It is extremely effective and energetic.
- It isn’t available in 0.043 inch Chain gauge.
In a single movement, this tool sharpens both the teeth and the depth gauge. It’s ideal for casual users. For use with 3/8″ P chains.
This is an amazing model on which you can mount your chain and get it sharpened. You can control it manually; there is no need for electricity. It is made of die-cast aluminum and zinc-plated steel. The change should have a standard pitch and lowering depth Gauge.
- It is cost-effective.
- Simple and manual working
- It’s made of long-lasting die-cast aluminum.
- It can be used with any kind of chain.
- No files
So which one to choose?
This is a list of the top 13 chainsaw sharpeners for both technical and home use. The majority of these are of good quality, are long-lasting, and have a powerful motor. The Buffalo Tools ECSS electric chainsaw sharpener is the best. Any device made in Oregon is also a good choice because it is durable and strong. But now it’s up to you to decide. The most appealing choice on the list.